The short answer
Professional cabinet painting is priced by the piece, and Angi puts it at about $100 per door and about $25 per drawer front. By the run of cabinets, Angi and HomeAdvisor both put it at $30 to $60 per linear foot. For an example kitchen with around 30 doors and 12 drawers, the per-piece figures add up to about $3,300. That is below the bottom of Angi's range for refacing, and you keep the cabinets you already have.
Below are the published figures, three worked kitchen examples, what moves the price up or down, and an estimator at the bottom of the page that turns your door and drawer counts into a single benchmark estimate.
Cost at a glance
The table below shows the published national figures for professional cabinet painting. Per door, it runs about $100, and a full professional job averages $934 in Angi's data.
| Measure | Published figure | Source |
|---|---|---|
| Average professional job | $934 (typical $425 to $1,459) | Angi |
| Per linear foot | $30 to $60 | Angi, HomeAdvisor |
| Per square foot of cabinet face | $3 to $10 | Angi, HomeAdvisor |
| Per door | about $100 | Angi |
| Per drawer front | about $25 | Angi |
| Per whole cabinet | $75 to $150 | Angi |
| Painter labor | $20 to $50 per hour, about 85% of the job | Angi, HomeAdvisor |
| Repairs before painting | $140 to $500 | Angi |
| Refacing, for comparison | $4,300 to $10,100 | Angi |
Why the average job looks low
Angi's $934 average is real, but it is not what a whole kitchen costs. That average comes from every cabinet painting project in their data, including a single vanity, a laundry room run, or a homeowner who only had the island done. Thirty doors at about $100 each is already $3,000 before a single drawer front. For a full kitchen, the per-door and per-drawer figures are the better guide, and they are what the examples below use.
Cost by kitchen size
At the published per-piece rates, a small kitchen comes to about $1,950, an average kitchen about $3,300, and a large kitchen with an island about $4,850. These are worked examples using Angi's figures of about $100 per door and about $25 per drawer front. They are arithmetic, not jobs we have done or quoted.
| Example kitchen | Doors | Drawer fronts | Doors at $100 | Drawers at $25 | Example total |
|---|---|---|---|---|---|
| Small | 18 | 6 | $1,800 | $150 | $1,950 |
| Average | 30 | 12 | $3,000 | $300 | $3,300 |
| Large with island | 44 | 18 | $4,400 | $450 | $4,850 |
To run the numbers on your own kitchen, count every door, including the tall pantry and the small one over the fridge, then count every drawer front, including false fronts on the sink base. Those two counts are the most important part of any cabinet painting price, and they are the first two things the estimator below asks for.
What raises or lowers the price
Door count moves the price more than anything else, followed by anything that adds steps before the first coat of paint. Here is what changes a quote, in rough order of how much it matters.
- Number of doors and drawer fronts. Every door has two faces and four edges to prep, prime and coat. More pieces, more hours.
- Oak grain filling. Oak has open grain that shows through paint. Filling it smooth adds coats and sanding to every door. See what painted oak looks like with and without grain filling.
- Existing paint that is failing. If old paint is peeling, it has to come off or be sanded back to a sound surface first. That can double the prep on the worst doors.
- Thermofoil or laminate. These surfaces need different prep, and some are not worth painting at all if the skin is lifting.
- Two colors. A two-tone kitchen means separate masking, separate primer tinting and separate finish coats. Our cabinet color and sheen guide covers what a second color does to the look.
- Painting cabinet interiors. Insides add a lot of surface area. Glass-front uppers are the usual exception, since their insides are on display.
- Repairs. Angi puts repairs before painting at $140 to $500. Think loose face frames, chipped door edges, and split panels.
- Hardware changes. New pulls with a different hole spacing mean filling the old holes, sanding them flush and drilling new ones.
- Crown, end panels and light rail. Decorative trim adds linear footage without adding doors.
The price comes down when the cabinets are clean and sound, the doors are flat or shaker-style, there's one color, and the hardware holes stay where they are.
Spray vs. brush and roll
A sprayed finish is the smoothest, but it costs more setup time. A brushed and rolled finish costs less to set up but takes more care to keep free of marks. With spraying, most of the labor goes into masking and setup, then the coats go on fast and level. With a brush and a fine roller, setup is lighter, but each door takes longer to coat, and a good result depends on a self-leveling enamel and a steady hand. Either way, the hours are mostly prep: cleaning, sanding and priming are the same work whichever tool lays down the finish.
Paint and primer
Cabinet enamel costs more per gallon than wall paint, but it is a small share of the bill. Cabinets need a bonding primer that grips a factory finish and an enamel that cures hard enough for doors that open thousands of times a year. Wall paint stays too soft and will stick and scuff. Even so, Angi and HomeAdvisor both put labor at about 85% of a professional job, so the choice of a better enamel barely moves the total.
Painting vs. refacing vs. replacing
Painting is the lowest-cost of the three ways to change how a kitchen looks. Refacing costs more, often much more, and replacement costs the most.
| Option | What it changes | Published cost |
|---|---|---|
| Painting | Color and finish of existing doors, drawers and boxes | about $100 per door, $25 per drawer front (Angi) |
| Refacing | New door and drawer fronts, new veneer on the boxes | $4,300 to $10,100 (Angi) |
| Replacing | New boxes, doors and usually counters | the most of the three; it includes new cabinets and installation |
If you are not sure which one your kitchen needs, our guide to painting vs. refacing vs. replacing walks through the checks.
What DIY costs
Doing it yourself costs $200 to $600 in paint and supplies, according to Angi, plus most of a couple of weeks of evenings. The savings are real. So are the usual problems:
- Skipping the degreaser, so the paint bonds to kitchen grease and peels at the pulls.
- Using wall paint, which stays soft and sticks when doors close.
- Brushing the boxes in place, then rushing the doors, which leaves brush marks and sags on the most visible surfaces.
- Rehanging doors before the paint can handle it, which leaves bumper marks and dents.
- Losing track of which door goes where, then spending a day adjusting hinges.
If you go the DIY route, the step that matters most is the cleaning. Grease is the first thing that makes cabinet paint fail.
Ways to spend less without a worse result
You can keep the price down by changing the scope, not by cutting corners on prep. Each of these keeps quality the same and reduces hours:
- Keep one color. Two-tone kitchens look great but add a full set of steps.
- Keep your hardware holes. Pick pulls with the same spacing, and there's nothing to fill.
- Skip the interiors. Paint the faces, edges and the inside of glass-front doors only.
- Do the vanity in the same visit. A bathroom vanity added to a kitchen job shares the setup.
- Fix water damage before the painter arrives, or have it done as part of one repair visit rather than a return trip.
How we quote
We quote in writing from photos and a door and drawer count. You send a few pictures of your kitchen through the quote page, with the count if you have it, and we reply with a written price or with questions about what we see. The quote lists what is included, so you can compare it line by line against any other painter's. If you want the bigger picture first, start with how we paint cabinets in St. Joseph.
Cabinet painting cost questions
Is it cheaper to paint or replace cabinets?
Painting is much cheaper. On Angi's figures, an average kitchen of 30 doors and 12 drawer fronts paints for about $3,300, while refacing alone runs $4,300 to $10,100. Replacement costs more than either because it includes new cabinet boxes and installation. Painting only makes sense if the boxes are solid and you like the layout.
Do painters charge per door or per foot?
Both methods are common. Angi and HomeAdvisor publish $30 to $60 per linear foot, and Angi also publishes about $100 per door. Per-door pricing is closer to the actual work, because a run of narrow doors takes more hours than a run of wide ones of the same length. We count doors and drawer fronts.
Does grain filling cost extra?
Yes. Wherever it is done, grain filling adds labor. Each oak door gets extra filler or high-build primer coats and extra sanding before it is painted, so the cost scales with the door count. Whether it is worth it depends on how much you mind seeing the grain, which our oak guide shows side by side.
Is cabinet painting worth it on older cabinets?
Usually, yes, if the boxes are solid. Older site-built cabinets are often better built than newer particleboard, and paint suits them well. It is not worth it when the sink base floor is swollen from water or shelves are sagging. Those are cases for repair first, or for replacement.
Instant estimate
Include island and vanity pieces in these counts once.
Other project options (unpriced)
$100 per door + $25 per drawer front, using the published Angi benchmarks. Other options are unpriced. Your written quote comes from photos of your kitchen.
Get a written quote ↗Enter your door and drawer counts to see a benchmark estimate at $100 per door and $25 per drawer. Other options are passed to the quote form without changing this estimate. Your written quote comes from photos of your kitchen.
Sources
- Angi, How Much Does It Cost to Paint Kitchen Cabinets?, updated August 2024.
- HomeAdvisor, How Much Does It Cost to Paint Kitchen Cabinets?
Get a written quote for your kitchen
Send a few photos and your door count, and we will reply with a written price for your cabinets. Get a Quote
Rated 4.6 from 37 Google reviews